How To Intatll And Maintain TW22

How To Intatll And Maintain TW22

After electricity, directly set the confirmation key, then the computer board will show [AA], AA is represented by [90] angle adjustment, the default is the number of 90, the larger the number, the greater the angle, the smaller the number, the smaller the angle. Then the confirmation turns into [BB], and BB represents the angle of [135], the default number of 135, the larger the number, the greater the angle, the smaller the number and the smaller the angle. Finally, press the settings confirmation, then press the single control, then try the machine again

Prepare a 4 square line No need to addgear oil machine Use needs to be grounded

Brand Quality Service

From inspiration to installation, we want to help create a home that fills you with delight and comfort.

Computer version does not display

1.  check whether the insurance is burned, and the burn should be replaced.   2. check whether the rush button is open or untouched

Large angle change

1. check the screw loose on the working disc . 2. whether the close switch on the panel is damaged or not

Computer version does not display

1.  check whether the transformer is damaged or not, and replace it with the need to replace it (the working voltage of the computer version 12V).

Turn a dead machine (without a degree)

1. check whether the encoder hose is off or not, and replace the new hose. 2. check whether the encoder is damaged and the damage needs to be replaced.

Before bending steel bar, pile head and pile head sleeve should be selected according to the strength and diameter of the reinforcing bar. After each class is finished, the workbench should be cleaned and grease applied to the working face. It is strictly prohibited to refuel or wipe the machine during the operation. It is not allowed to change center pile head, retaining head or baffle plate during operation. Machines should be coated with antirust grease on the surface of the machine and placed in dry places in the room.

Intelligent numerical control operation Life free refueling

contact us

...............................................................................

Tel: +8613281163201

WhatsApp: +8613281163201

Email:sales6@cdgute.com

..............................................................................

https://www.gutemachinery.com