Steel Rebar Double Head Bending Center
Features (WS-42):
Rated Power: 22kw/h
Max. Bending Angle: -180º/+180º
L*W*H: 14000*4000*1200mm
Weight: 4t
- Product Introduction
The center of Vertical Rebar Bending adopts digital control. This equipment’s features are simple operation, convenient maintenance and economic utility. It can also realize automatic length measurement, automatic bending clamp, rapid prototyping and other functions. The control program of imported PLC and CNC stores hundreds of figures and is equipped with database. It applies advanced designing concept and adopts imported servo motor driving and controlling. Therefore, it realizes two-way digital control bending and accomplishes more than 20 angles figures. The producing efficiency is high. It can process 5500 sticks everyday on average, which replaces 12 workers and is more than 10 times of traditional processing equipment. This equipment especially applies to highway bridge construction site and rebar concentrated processing factory, etc.
| Vertical Rebar Bending Center | |||||||||
|
RATED POWER |
15KW |
MAX. BENDING SPEED |
72°/SEC |
||||||
|
AIR PRESSURE |
0.8MPA |
WEIGHT |
3.9T |
||||||
|
MAX. BENDING ANGLE |
+180° |
L*W*H |
12000*2000*1500MM |
||||||
|
-120° |
|||||||||
|
MAX. LENGTH OF STIRRUP SIDE |
10M |
ELECTRIC CONSUMPTION |
4KW/H |
||||||
|
MIN. BENDING SIDE LENGTH |
520MM |
STEEL BAR DIAMETER |
10 |
12 |
14 |
16 |
20 |
22 |
25 |
|
BENDING HEAD MOVING SPEED |
0.5-2M/SEC |
BENDING QUATITY |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
Hot Tags: steel rebar double head bending center, manufacturers, suppliers, price
