Regular Maintenance Cycle Table For The Series Of Straightening Machines
Apr 27, 2022| No. | Maintenance part | Maintenance method | maintenance required | maintenance cycle | Remark |
1 | machine table | clean up iron dust | --------- | Check and clean iron ash at work every day | |
2 | Gearbox oil | Oil pool lubrication | 68# heavy duty gear oil | Use for 7 days for the first time, and change every year thereafter | Add to oil window center |
3 | Hydraulic oil | tank | 46#/68# Anti-wear hydraulic oil | 8-12 months replacement | |
4 | Cutter guide | surface refueling | Calcium-based grease SYB491-87 | Check and refuel every day at work | |
5 | Slag bucket part | clean up iron dust | -------- | Check and clean iron ash at work every day | |
6 | Feed port | Bearing chamber lubrication | Calcium-based grease SYB491-87 | Check and refuel every day at work | |
7 | Straightening wheel bearing | Bearing chamber lubrication | Calcium-based grease SYB491-87 | Check and refuel every day at work | |
8 | Straightening frame bearing | Bearing chamber lubrication | Calcium-based grease SYB491-87 | Check and refuel every day at work | |
9 | Electric control box | clean up iron dust | -------- | Check and clean iron ash at work every day |