How To Deal With The Problem Of GQ42D

Mar 02, 2023|

How to deal with the problem of GQ42D

 

Products Description

 

•Adopts gears,shafts,connection rod and blades made of high-quality alloyed steel with required heat
treatment(quenching/tempering/high frequency)and 12mm thick external case to ensure reliable performances also under heavy loads and long working life
•Connection rod has high hardness degree on attaching part with the blade,its internal side is made of tin-bronze to avoid
abrasions while touching the crankshaft.
•Thick and durable blades to ensure accurate cutting with all kinds of steel bar(square blade or moom-shape blade opetion)
•CE certificated dust proof motor with aluminium shell.
•CE certification

 

steel bar cutter
STEEL BAR CUTTER GQ42D

 

 

Installation requirements:

 

 

  1. The best position for filling the red hole of the observation hole with gear oil is approximately 8L (16 kg) of gear oil 
  2. Need to prepare a 4 square three-wire machine to use

 

Simple maintenance:

 

Fault phenomenon

cause

Approach

 

 

 

Cut constant steel

 

 

 

 

 

 

Clutch disc keys and card wear

Replace clutch assembly or transfer

Triangle belt loose

Adjust the V-belt

Link deformation

Replace the connecting rod

Copper wear

Replace copper tiles

Large pulley flat key breaks

Change the key

Voltage is too low

Adjust voltage

Motor reversal

Adjusting the phase sequence

 

 

Machine can not cut steel:

 

steel bar

 

Machine maintenance:

 

 

1 The rust and debris on exposed parts should be removed after each shift to keep the whole machine clean.

2 When working outside, care should be taken to protect the motor and electrical parts against moisture and rain should not be allowed.

3 Regularly check the tightness of the V-belt. 4 When the machine is decommissioned for a long period of time, anti-rust grease should be applied on the processed surface and placed in a dry place indoors.

 

Because the noise is reduced and silent operation is achieved, the gear reducer and the motor adopt a closed-market structure and no gear oil is required.

 

 

Contact us:

 

 

 

...............................................................................

Tel: +8613281163201

WhatsApp: +8613281163201

Email:sales6@cdgute.com

..............................................................................

https://www.gutemachinery.com

 

Send Inquiry