Frequently occurring failures of steel bar bender machines

Frequently occurring failures of steel bar bender machines include the following: (1) Tool head rotation, which is a relatively simple fault, as long as the dynamic knife sensing switch can be adjusted. (2) After the delivery of the steel bar is not straight, often upturned under the bend problem, this time should be adjusted below and above the last group of rounds, the top of the opposite direction in the past. (3) When a double steel bar has a tendency to come off the bending axis when bending double bars, the response should be to reduce the speed of bending. In the use of steel bending machine to pay attention to the pressure to maintain, generally 4MPa is appropriate, too high may cause deformation of the steel or equipment damage.