Home > News > Content

How To Better Maintain The Plate Compactor?

- Aug 26, 2017 -

How to better maintain the plate compactor?

1, for a long time do not use, will fuel valve (oil switch in the choke below) closed, and then idle operation, so that the carburetor burning oil.

2, asphalt repair operation, you can wipe the diesel oil on the bottom board, to prevent the adhesion of asphalt.

3, cement work or stable layer operation, after use, pay attention to cleaning machine.

4, work oil is pure gasoline, filling more than 93 unleaded gasoline.

5, before work, let the engine idle running for 2-3 minutes, and then work; before flameout, also let the engine idle running for 2-3 minutes, then flameout.

6, work at the throttle to the maximum position to work.

7, start the engine start pull rope, not too hard, as long as the tear felt the degree of resistance in moving, and then pulled in this position will suddenly start; and then start to handle gently. Starting in winter, the choke can be switched off, but must be turned on after starting.


Related News

Related Products

  • CNC Stirrup Bending Center
  • Manual Bar Bending Machine
  • Electric Bar Bender
  • Steel Bar Straight Cutter
  • Rebar Stirrup Bender
  • Electric Rammer